MANUAL CONTROL
GUIDE
Whether you are using Rejuvenate offline or just do not have your smartphone with you, you can still interact with Rejuvenate. See below for a Button Control Chart.
Note: After 15 seconds without input, Rejuvenate will go back to its initial state if you haven’t made a final selection.
Quick actions with status button:
- Single click to dim lights until the next day or restore optimal brightness.
- Double click to activate the fog and lights for a show!
To start growing your plants:
1. Press and hold the button for 3 seconds.
2. The status light should now pulse GREEN.
⬬
3. Press and hold the button for 3 seconds to start your Pod Pack selection, the light will now be solid GREEN
⬬
4. Click the button to cycle through the Pod Packs available
● Leafy greens (status light solid GREEN).
⬬
● Flowers (status light solid MAGENTA).
⬬
● Herbs (status light solid BLUE).
⬬
5. Press and hold the button for 3 seconds again to make a selection. The light will flash with the selected Pod Pack color and you will hear audible confirmation feedback for a few seconds.
6. Rejuvenate has started growing your plant selection!
When you are ready to harvest:
1. Press and hold the button for 3 seconds.
2. The status light should now pulse GREEN.
⬬
3. Click the button to cycle through the options until it pulses RED.
⬬
4. Press and hold the button for 3 seconds to begin harvest, the button will turn solid RED.
⬬
5. You can now harvest your plants and prepare your Rejuvenate for cleaning.
Cleaning mode:
1. Press and hold the button for 3 seconds.
2. The status light should now pulse GREEN.
⬬
3. Click the button to cycle through the options until it pulses WHITE.
⬬
4. Hold the button for 3 seconds for Clean Cycle selection.
5. Click the button to cycle through the cleaning options:
● Press the button once for 30 minutes cleaning process (solid BLUE).
⬬
● Press the button once for 1 hour cleaning process (solid ORANGE).
⬬
6. Continue to follow the cleaning instructions found on your user manual.
Drain top tank:
1. Press and hold the button for 3 seconds.
2. The status light should now pulse GREEN.
⬬
3. Click the button to cycle through the options until it pulses YELLOW.
⬬
4. Press and hold the button for 3 seconds to make selection. The light will turn solid YELLOW, you will hear audible confirmation feedback for a few seconds.
⬬
5. The top tank drains completely after 15 minutes.
Connecting Rejuvenate to the Internet:
1. Press and hold the button for 10 seconds until the status light pulses BLUE.
⬬
2. Download and open the Plantaform App on your phone.
3. Tap 'Add New Device'.
4. Follow the instructions on your phone.
5. Rejuvenate is connected to the internet when the status light changes to solid WHITE.
⬬
